Rust-Oleum EpoxyShield® Garage Floor Coating is a user friendly and easy to apply water-based epoxy garage floor coating with an ultimate adhesion and durability.
The product has an excellent wear, impact and abrasion resistance like heavy foot and vehicle traffic. Resists chemicals and standing water. The kit consists out of a 2-part epoxy coating, a cleaning solution, decoration chips, paint paddle and an instruction DVD.
Apply on concrete floors, which are completely clean and dry. It is not recommended to apply on smooth/dense concrete or concrete containing a curing compound, which will prevent a good adhesion. Can also be applied on old good adhering coatings.
Remove any oil or grease spots on the floor using a scrub brush and a cleaner & degreaser. Remove any excess cleaner with paper towels and rinse thoroughly with water.Mix all concentrated cleaner from the kit with approximately 7½ litre of water until dissolved and spread the mixture over the floor. Scrub thoroughly with a stiff bristle brush to loosen dust and dirt. Once all sections are completed, rinse and squeegee the entire garage floor to remove any cleaner and allow to completely dry before applying the coating.