For use with Tritech T360 Contractor airless spray gun for all applications requiring a superior finish.
The first digit denotes the fan width measured in inches. This can range from 2" - 12". Take half the required fan width to give the first digit. For example if a 4" fan width is required the first digit should be 2. The second & third digits denote the orifice size in thousandths of an inch. for example 10 = 0.010".
For satisfactory results and to avoid putting excessive strain on the pump the maximum tip size shown for each machine should not be exceeded.
What makes the difference?
In a conventional tip, the paint is atomized once. In a Ultra Finish Tip, its atomized twice. It's this that gets the ultra finish, even when working at low pressures. With a little practice, total control can be achieved, with virtually no over spray.
Sign up now and be the first to know about exclusive offers, product updates, and announcements.